Wolf Yagi 6_11m

   The WY6_11m is a six element yagi style beam that can be mounted for vertical or horizontal polarization. The WY6D_11 is designed for dual polarity.
      The WY6 is a large size beam antenna and should be mounted on a tower (Rohn 25g or larger) and turned by a heavy duty rotor (Ham IV or larger). The WY6D_11m can be ordered with a Quad reflector. The gain is 17dBi with a 44dB front to back ratio. The antenna is all aluminum with plated steel u-bolts. The WY6_11m weighs 39 lbs, the boom is 32 feet long and 2 inches in diameter. It has 5/8 inch center elements and 1/2 inch element arms. The longest element is 18 ft. It's stock gamma match can handle 1000 watts of power with higher powers available upon request.

  The WY6 uses a three way fiberglass rod boom support system. The rods are mounted at 120 degrees points around the boom. This not only takes the sag out of the boom but prevents lateral and upward movement. The result is a very strong perfectly strait boom structure that does not sway or give in any plane. This system is easy to assemble and will not stretch for the life of the antenna. The rods do not effect the electrical performance of the antenna while giving it the ability to handle winds of 100 mph! The above photo shows the support system and boom without the elements installed. Below left is the completed antenna, on right a close up of the guy anchor assembly.

  Price: WY6_11m $265.00
Price: WY6D_11m $405.00

SPECS: WY6_11m/WY6D_11m
STYLE ---------------------------------- YAGI BEAM
POLARITY -----------------VERT./HOR. or DUAL
BOOM -------------------------- 32-FEET x 2" O.D.
GAIN  -------------------------------------------- 17-dBi
Font to Back Ratio  --------------------------- 44-dB
POWER RATING ------------ 1000 WATTS ICAS
FREQUENCY ------------------ 11 meters/ 27mHz
S.W.R. --------------------------------------- 1.1 to 1.0 
FEED -------- D.C. Grounded, Gamma Matched 

For questions, comments, antenna orders,
etc. send email: EddieC@wolfradio.com